Paint specific vibrating screen

Introduction to paint professional vibrating screen:

◆Using a brand-name vibration motor, it has the characteristics of low noise, small size, light weight, low power consumption, strong overload capacity, and fine appearance. It is a new generation product.

◆Using the self-developed "Z" type network frame and single-layer network structure, it eliminates the disadvantages of traditional double-layer network friction, extending the service life by 2 to 3 times, and it is convenient and simple to change the network. It only takes 3 days to replace the network. ~5 minutes.

◆The unique dish-shaped design makes it easy to observe materials without splashing, and the effect is better.

◆ Small amplitude, high frequency, up to 1500 times/min, good material screening effect.

◆All parts in contact with raw materials are made of SUS304 material, with beautiful appearance.

The purpose of using high frequency series vibrating screening filters:

This equipment is mainly used for filtration of ceramic glaze. It is one of the mature products developed by our company for the ceramic industry.

◆Solid-liquid separation: This equipment can effectively handle solid-liquid materials, quickly achieve solid-liquid separation, and filter out materials of different mesh sizes.

◆Impurity removal: This equipment can remove small amounts of impurities of different sizes from a large amount of liquid materials for rapid separation.

Requirements for the use of high frequency series vibrating screening filters

◆Feeding should be uniform, and the feeding amount should be equal to the discharge amount. Feeding too much material at one time will hinder the normal movement of the material on the screen surface and greatly reduce the material handling capacity. Moreover, the load of the motor itself in unbalanced operation will suddenly increase, causing damage to the motor and reducing the life of the motor. If the feed volume cannot reach the processing capacity of the equipment, it will waste energy and reduce output.

◆Feeding method with strong impact force: A buffer hopper should be installed to allow the material to directly impact the mesh surface. This not only consumes the excitation force generated by the vibration source, but also easily causes mesh surface damage and screen fatigue, thus affecting the screening and filtration output.

Appearance size parameter table